Slide Rolling Ball Check Valve Abrasion Resistant for Mining Cement Slurry China Manufacturer

Slide Rolling Ball Check Valve

Essence: A valve that achieves one-way opening and closing by rolling a rolling ball along a slide, using the self weight of the ball or the pressure of the medium to block backflow.

Core features:

Rolling ball+slide structure: The ball freely rolls inside the guide rail, pushing it open when flowing forward, and quickly resetting and sealing when flowing backward;

Low flow resistance design: Full bore flow channel, suitable for high flow rates, particles or viscous media;

Wear resistance and high temperature resistance: Metal spheres (such as stainless steel) are suitable for high temperature or corrosive working conditions, with a long service life.

Typical applications: Pipeline systems that require wear resistance and backflow prevention in industries such as petroleum, chemical, and slurry transportation.

Get a quote

Energy conservation, environmental protection, and system protection
Flexible installation and wide applicability
Wear resistant and long-life materials
Low flow resistance and full channel optimization
Efficient sealing and silent closing design

Energy conservation, environmental protection, and system protection

01
Reduce water energy waste
Low flow resistance design reduces pump load, increases energy efficiency by over 20%, and reduces annual water energy loss by thousands of tons;
02
Preventing water hammer hazards
The rolling ball slow closing mechanism combined with sealing and noise reduction characteristics effectively eliminates water hammer impact and protects the pump body and pipeline system.

Flexible installation and wide applicability

01
Multi directional installation adaptation
supports horizontal or vertical installation without directional restrictions, meeting complex pipeline layout requirements;
02
Wide temperature range and medium compatibility
The working temperature range is 0-80 ℃, and it can be adapted to media such as cold water, hot water, industrial wastewater, and oil products.

Wear resistant and long-life materials

01
High strength material combination
The rolling ball is made of 304 stainless steel or ceramic material, and the slide is treated for wear resistance, corrosion resistance, erosion resistance, and can withstand media containing impurities;
02
Maintenance free operation
The slide guides the rolling ball to move, reducing friction loss, with a service life of up to one million opening and closing cycles, and reducing operation and maintenance costs by 60%.

Low flow resistance and full channel optimization

01
Full water flow channel design
The valve body has no reduction in diameter, the flow cross-sectional area is consistent with the pipeline, the head loss is reduced by about 50% compared to traditional swing type, the flow rate is large and the resistance is small;
02
Suitable for high flow rate media
The full bore structure is suitable for clean water, sewage, granular or viscous liquids, especially for high flow scenarios such as submersible sewage pumps.

Efficient sealing and silent closing design

01
Rubber rolling ball+slide structure
The rolling ball wrapped in rubber is matched with an integrated slide. When closed, the rolling ball tightly adheres to the valve seat, achieving a leak free seal, and the soundproof closure avoids water hammer impact;
02
Spring assisted rapid locking
Combining gravity and medium pressure, the rolling ball quickly resets when flowing in reverse, blocking the risk of backflow.

Performance Specifications & Dimensions

Nominal Pressure PN

1.0/1.6/2.5
Shell F

Px1.5
Sealing Pressure

Px1.1
Medium

Water and weakly corrosive fluids
Temperature (℃)

0~80℃

Nominal Diameter DN(mm)	L	H
50	180	180
65	200	210
80	260	245
100	300	280
125	350	335
150	400	400
200	500	495
250	530	610
300	695	715
350	800	820

Note: The pressure range is 1.0MPa~2.5MPa. The above data is for reference only. Please consult the company's sales department for details.

Valve Application

Oil & Gas Transportation

Oil and gas transportation involves multiple modes such as pipelines and ships, and is the core link of the energy supply chain.
Chemical Raw Material Control

The control of chemical raw materials covers the entire process of mining, storage, and production, ensuring safety and process stability.
High Temperature SteamPipeline in Power System

High temperature steam pipelines are the core of energy transmission in power systems, supporting the efficient operation of thermal and nuclear power plants.
Other Industries

Valves control fluids in multiple industries such as new energy and electronics, ensuring safe and efficient production.

Part Name	valve body	ball
material	Cast iron, ductile iron, cast steel	Steel body wrapped in rubber